Precautions for CNC processing Pay attention to safety details

In the precision machining process, every job is a problem that needs attention, especially in the case of precision CNC machining, the attention to the details of the machining process is very important. Only in this way can good results be obtained when the work is carried out. So what details should be paid attention to in precision CNC machining?

1. Before machining precision CNC parts, check whether the moving part of the machine is filled with lubricating oil, then start and check whether the clutch and brake system are normal, and run the machine tool for 1-3 minutes. When the machine has a fault Actual operation is prohibited.

2. Maintain a correct posture when working, and have sufficient mentality to cope with the work. If CNC processing finds that you are not feeling well, you must leave the post immediately and report it to the leading cadres. During operation, the mind must be concentrated, chatting is prohibited, and cooperation is prohibited. Operators must not operate when upset or tired, so as to prevent accidents and ensure safe operation.

3. When replacing precision parts, first turn off the power, and after the high-speed punching machine stops running, you can start to install and adjust the mold. After the installation and adjustment are completed, move the flywheel of the water pump by hand and test flush twice to check whether the left and right molds are symmetrical and effective, whether the screws are firm, and whether the hemming strips are in the effective position.

When machining precision parts, pay attention to some safety details, otherwise CNC precision machining may lead to product scrapping and self-safety problems.

1. Before precision CNC machining, the design drawings of the parts must be clear, with clear dimensions and reasonable processing requirements. If there is a problem with the marked size, it may cause the processed precision parts to be unusable. Affects poor processing of parts.

2. The precision parts processing operator must maintain a correct posture, have sufficient energy to cope with the work, and concentrate on cooperating with each other during operation. Adjust your mentality when you are irritable and tired. In order to avoid accidents.

During operation, pay attention to whether the movement and processing status of the machine tool are normal, and if any abnormal phenomenon occurs. In case of noise and alarm, stop the machine immediately for inspection and treatment, and continue to operate and process after the machine tool is eliminated.